• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser Installation

Secure your prized possessions from car thieves by adding an immobiliser ghost. Our TASSA-certified system guards against key cloning, hacking, and bypassing the vehicle immobiliser.

The system is hidden in the wiring loom of your vehicle, so it is completely invisible to anyone who looks. It operates by creating an e-pin code push sequence by using existing buttons on the steering wheel doors, door cards and the central console.

No circuit cuts

A car is a precious asset that you put in many years of effort to acquire, so it's understandable why owners want to safeguard their vehicle against theft. Traditional security devices, like alarms or wheel locks, are easily manipulated by thieves. Ghost immobilisers, on the other hand is a very effective solution that operates in a quiet manner and cannot be recognized by modern day thieves.

A ghost immobiliser is a hidden device that connects to the CAN data network in your vehicle to disable the engine, without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle through buttons on the steering wheel, dash and door panels. This creates an unique pincode only available to you. The code can be changed at any time and can have up to 20 numbers based on your preferences. It also comes with an emergency code you can use in the event that you forget your PIN.

The ghost ii immobiliser immobiliser can be used to prevent relay boxes from transferring your car key's signal from within your home, which could unlock the doors and start the vehicle. It also blocks high-tech methods to steal your vehicle, such as OBD port hacking. The device is tiny and weatherproof, meaning it's hard to spot and is even more difficult to interfere with.

The ghost immobiliser has another benefit: it can be inserted into your vehicle without leaving any permanent marks. It is ideal for people who are planning to sell their vehicle in the near future. It's also much more efficient and less time-consuming to install than an original factory-fitted system.

The autowatch ghost immobiliser Ghost is a groundbreaking next-generation device that blocks theft of cars using contactless technology by connecting to the vehicle's CAN data network and using the existing buttons to generate a unique PIN code. This is a stealthy device that can be put in with no wires cut and does not require any additional key fobs. It can also be connected to the original ECU of the vehicle, thus preventing thieves from bypassing it with a new key. This system has been TASSA-verified and is able to be linked to an International Security Register. Owners will have peace of mind knowing that their vehicles are protected from theft.

No scanning with RF

You will want to protect your vehicle from theft if have spent an enormous amount of money and effort to customize it. One way to do this is to install an immobiliser, which will prevent your engine from starting unless you enter a unique PIN. By using the buttons on your steering wheel as well as the dashboard, you can create an up to 20 digits long which is only known by you, making sure that only you have access to your vehicle. You can also set up a valet or service mode that will allow you to temporarily start your vehicle without entering the PIN code. This will allow the technician to work on your vehicle without being present. This feature is great for those who wish to save time and simplify their lives.

Ghost immobilisers are next generation device that connects to your vehicle's CAN data network, and uses the buttons on the steering wheel and dashboard to program a personal PIN code. It is designed to blend in, as it does not emit any sound or LED indicators. It can be placed anywhere on your vehicle without impacting the appearance of your vehicle.

This stealthy system has been approved by TASSA and could lower the cost of insurance. It also has the ability to track, which can locate your vehicle even if it's been stolen. This is a great feature for those who own a unique, expensive vehicle which you've invested time and effort to customize.

Autowatch Ghost, in conjunction with the iPhone application allows you to remotely start your car if you have forgotten your PIN number or are unable to access your vehicle. This feature is great if you have to run errands or pick up your kids, but do not want to let someone else drive your vehicle. This feature is helpful in the event that you need to bring your car in for service or repair.

The Ghost has the advantage that it doesn't transmit or detect radio frequencies which means it's not detected by thieves who use RF scanning and code grabbing technology. It also shields your vehicle from key cloning, ECU swapping and other common methods of car theft.

No key to cloning

Ghost immobilisers are a fantastic option for ghost immobiliser Installation protecting expensive vehicles. They are designed to stop key copying. They prevent your vehicle from starting without a PIN code being entered along with the regular key fob. This makes it more difficult for thieves to steal your vehicle, and Ghost Immobiliser Installation can stop them from trying. This is a good idea if your vehicle has been heavily modified or is a rare model.

The immobilisers are connected to the vehicle's CAN data network onboard and are completely concealed, meaning that their presence isn't evident. The device is also difficult to identify using radio frequency scanning technology or code grabbing. This means that a thief will need to wait longer to take your vehicle.

To get around the system, thieves must be aware of the unique pin code and the location of the Ghost. The pin code is unique to you and can alter it as many times as you want. The pin code you select is simple to remember, however, it is mathematically impossible for anyone else to figure out. Additionally the engineer will have provided you with an emergency PIN code that can be used to bypass the pin in case you ever forget the pin.

The Ghost CAN Bus immobiliser can be easily mounted anywhere on your vehicle. It works with all vehicles and is completely customizable to match the look of your car. It is also very cost-effective and simple to use. The device can be transferred to a different vehicle, if it is compatible with the new vehicle.

The CAN bus is compatible with other security features. For example, it can detect damage to your vehicle and notify the owner. It could also stop the engine in the event that the car is damaged. The system can also protect your vehicle from key cloning and hacking. It also detects vibrations or contact with the vehicle. Additionally, it will notify the owner that the vehicle has been moved.

No OBD port hacking

Ghost employs an immobiliser that is hidden and connected to your vehicle's CAN data network that prevents thieves from gaining access to your vehicle to disable the alarm, turn off the key fob and code new keys. This technology is a significant improvement over the traditional methods used by thieves to steal vehicles in the past. The CAN data network also means that the system will not be affected by disconnecting or replacing your battery.

The Autowatch Ghost is the first immobiliser for CAN bus aftermarkets worldwide, safeguards against key-cloning, hacking, and replica car theft. It does not use LED indicators or key-fobs, instead leveraging the buttons on your steering wheel, centre console and door panels to let you create a unique PIN sequence (up to 20 button presses) that must be entered before you can drive your vehicle away.

Modern thieves employ diagnostics to detect cuts in the circuit in your vehicle. They are able to bypass immobilisers that require a large amount of wiring or are built into the wiring. The Ghost is weatherproof, doesn't need any additional wiring, and can't be detected by professional diagnostic tools. It can even be fitted on vehicles that are fitted with anti-theft equipment.

Another major benefit of the Ghost immobiliser is that your vehicle is only able to be started by someone who knows the PIN code and has physical access to your car. This is a big benefit over traditional security systems that can be bypassed with simple cable alteration, a screwdriver or the utilisation of an universal remote controller.

You can easily reset your PIN in case you forget it using the emergency PIN override feature on your mobile or computer. This is a great option if you need to start your car after it's left in a garage, or a valet parking service.

The Autowatch Ghost 2 is the latest version of the product, and is approved for insurance by TASSA when installed by one of our authorised installers. It features a QR fingerprint system to identify individual parts that allows for the return of stolen items in the event that they are discovered. It can also be set to'service mode', which allows the engine to start when your car is in a garage, or with valet parking, however, you must enter your PIN code again to exit the car.