• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The ghost immobiliser fitting (Look At This) Immobiliser

ghost immobiliser 2 Immobiliser will protect your prized item from theft. This system is discreet & doesn't require additional key fobs in order to operate.

The device utilizes buttons on your vehicle (steering wheels, door panels and centre console) to create a unique pin code sequence that can be modified up to 20 times. This then authorizes the vehicle to start.

Simple PIN Code Change Process

Many owners are upgrading their security because of the rising number of vehicle thefts. There are a myriad of security devices that are sold aftermarket, from tracking systems to alarms and immobilisers. However there are a few that are equally effective in protecting your car. While a tracking system can assist in finding your car in the event of theft, it does not prevent the crime from occurring in the first in the first place. Immobilisers, on the contrary perform exactly as they say on the tin - they disable your car's motor to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to steal your vehicle.

Using the existing buttons in your car The ghost ii immobiliser device generates a unique sequence which must be entered before the engine starts. This can be done using the heater, window or indicator stalk buttons. In addition to this option, there is a mobile app which can act as an emergency PIN code override, allowing the driver to operate the car without the button sequence. This is especially beneficial if you have to surrender your car for valet parking or maintenance since the immobiliser will still be activated and Ghost Immobiliser Fitting not disabled.

The Ghost is a truly unique and innovative device that works in conjunction with the buttons of your car instead of being a separate unit. It is not only an effective deterrent for vehicle theft however, it can also be used on any future vehicles you may own. This makes it a far better investment than a conventional wheel lock.

Small, weatherproof device

The Autowatch ghost immobiliser is a sophisticated security device that protects your pride and joy against key cloning, hacking & ECU swapping. It is a small weatherproof device that connects with the ECU of your vehicle directly via the CAN bus to stop the motor. It can be installed in the vehicle without the need for additional wiring and has been extensively tested to ensure it is compatible with all vehicles. It also is resistant to jamming devices that are the most common method used by thieves to get around the immobilisers in place.

The benefit of CAN data over traditional systems is that they operate in a silent manner. It cannot be detected using sophisticated RF scanning and code-grabbing technology as well as detected by traditional diagnostic tools. The Autowatch ghost immobiliser review doesn't produce LED indications and uses the buttons inside your vehicle such as steering wheel, centre console or door panels to create a unique, customizable disarm sequence. This sequence can be extended 20 or more presses to provide additional security. The iPhone app allows a single, authorised connection, with the pairing code unique to the Ghost and communication between the two is encrypted.

The Ghost also prevents thieves from stealing the key to a new car or replacing the ECU to bypass the immobiliser and start the engine. The engine will only start only if a valid PIN has been entered. It is possible to operate temporarily in Valet/Service mode (with the appropriate parameters, like 30mph speed limit) and, therefore, you can give your car to an attendant or valet without needing to enter an entry code.

Each vehicle is tested

The Autowatch Ghost is a world-first aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device snoops on electronic signals to block the system of your vehicle from performing its normal initialization process until you enter the passcode you have created. The system can be activated and deactivated through your smartphone's app without the need for additional wires.

The factory-installed immobilisers function by using a transponder, which is built into the key. This sends a message to the ECU. The car will start if the correct code is sent. If, however, the transponder of a different vehicle is used instead, the immobiliser won't recognize it. This makes it possible for the vehicle to be stolen and started. The ghost immobiliser review immobiliser was created by an South African company at the forefront of vehicle security systems technology. It guards you against hacking or key cloning and even key theft. Only by physically towing your vehicle away can thieves steal it, and they would still not be able to drive the vehicle.

Ghost uses the buttons in your vehicle including the indicator stalk as well as the steering wheel and door panels to create an unique, changeable PIN code sequence that must be entered prior to you can use your car. It does this without additional hardware, like keys fobs. It can take up 20 to 20 presses. It is also unrecognizable to diagnostic equipment and doesn't transmit radio frequency signals, which means thieves are unable to make use of sophisticated RF scanning or code grabbing techniques to determine if a security system has been installed.

Contrary to physical anti-theft devices such as clamps or wheel locks, Ghost is hidden within the vehicle so it can't be disabled or removed by thieves. It's also harder to remove than a car alarm that requires disarming using an action sequence. This makes it an excellent alternative to an GPS tracking device that can be used to track your vehicle after it's stolen.

Override of emergency PIN code

You don't have to look too far on social media to see stories or even videos of vehicles that have been taken by thieves using the most advanced technology tools available to them. Key-cloning devices, for instance, and hacking tools that allow thieves to start the car without your original keys.

The Ghost immobiliser was designed to stop this and provide you with an additional layer of security to prevent your vehicle from being targeted by thieves. It creates a unique pin code push sequence from the buttons you have on the steering wheel, door panel, and centre console. The unique pin code is entered along with the original key fob to prevent the engine from starting. The unique override pin can be found on a black card that you will receive after the installation. It is simple to remember because there are no LED indicators.

The device is hidden in the vehicle's wires and does not emit radio signals, so it isn't able to be detected by modern thieves using diagnostic software that is able to identify the security system you have installed. This makes it an excellent alternative to the tracking device.

Unlike most other security systems that use a relay in the engine bay these CANBUS Immobilisers communicate with the car's ECU and BCM via the CAN data bus (brand dependent). This enables them to shut down the vehicle completely by sending the use of a digital block of commands that is sent to both the ECU and the engine.

It is also possible to connect an analog immobiliser, alarm or tracker to these systems, but this has to be specified before installing the device. They are also fully service/valet mode compatible and are a great alternative to a tracker when having your car in for repairs to an electrical issue at the dealership.

Service/Valet mode

In recent years there has been a rise in the number of vehicles being stolen with the owners' keys. It's easier than ever to steal your pride and joy due to the availability of key cloning tools and door lock picks. To prevent this from happening, we now offer the Autowatch Ghost immobiliser that prevents your car from being driven despite the fact that your keys have been copied or your vehicle has been stolen.

It directly communicates with your car's ECU (Engine Control Unit) through the data loop called CAN. It's completely silent since it doesn't use radio frequencies or key fobs. This means that it can't be detected by diagnostics or other car hacking devices. It also protects against adding the key to a new one or replacing the ECU to bypass the system as only the correct PIN code can allow the engine to start.

The device is hidden within your vehicle and is reached via the buttons on your steering wheel, the centre console and door panels. Before you can begin your car, you need to enter a unique and reversible PIN code that can be as long as 20 numbers.

This is the very first aftermarket CAN-bus immobiliser that was created. It can prevent your vehicle from being started or driven when you don't enter a PIN code before entering. If you are driving away with the device in motion the indicator will flash on your dashboard which will flash continuously for around 300m. Entering your PIN code will turn off the anti-hijack. Your car will continue to run as normal. If you don't enter your PIN at this point the indicator will continue to flash and will require a new PIN code each time you attempt to start your car.