• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

When It's Time to Repair Windows

It's important to be careful when repairing window your windows. The first step is to wear a pair of safety gloves and cut-resistant gloves to stop glass shards from cutting you during your work.

An easy fix for a broken window is to apply a plastic covering over the crack. This will prevent insects, snow, and rain from entering your home.

Glass that has cracked

Glass that is cracked not only makes your home look less appealing however, it could also allow drafts and other elements to enter the house. It doesn't matter if cracks result from an impact like a baseball or soccer, or stress, like the sudden temperature drop, but it is essential to have them repaired as quickly as possible to avoid further damage and to keep your windows working properly.

Use clear tape to cover the cracks in your window if it's not damaged. This is a quick, low-cost solution to protect your window from dust, water bugs, and other debris. It also shields your windows from the elements.

If the crack is extensive or is getting worse, it's recommended to seek out a professional. A glazier who is experienced can determine the cause of the crack and recommend a suitable repair method.

A crack caused by an impact is the most common type of window break, typically resulting from a hard object hitting your window with enough force to fracture it. These cracks usually have an explosion of lines and broken pieces. They can be hazardous if they become loose. If you have double-pane windows, this crack could compromise the gas layer between the panes and impact the efficiency of your window's energy use.

Another kind of crack is a stress crack, that develops slowly as time passes because of extreme temperature changes or other environmental elements. These cracks begin around the edge of your window and eventually can develop into full-blown breaks.

A more serious but feasible crack is a pressure crack. This is most often a curvy line that runs across one or more sides of your window and can be the result of low or high air pressure, which could cause expansion or contraction of the glass.

If you're ready to take further than nail polish and tape, there are a few other products that can be used to repair cracks in your window glass. Glass Repair Film, while more expensive can provide your windows with more protection and durability. If you'd prefer to go the DIY route epoxy is a sturdy adhesive that can fill cracks to keep them from getting worse and make your window appear like it did not have a crack at all!

Leaking Windows

If you notice an area of dampness under your window, or notice that the wood around it is soft or rotting, it could be time to consider a window repair project. Excessive moisture creates a breeding ground for mold and mildew, which can create a range of issues for your home. They can lead to indoor air pollution, sagging drywall, and even increase the severity of allergies. Unchecked, they may also cause structural damage to your home.

It is best to call a professional if the water is visible or coming from outside. Leaking windows are among the most common causes of mold and structural damage and should not be left untreated.

In many cases, a simple layer of caulking is enough to stop the leaks. Before applying the caulking, it's necessary clean the area and take off any caulking you have already applied.

Examine the weepholes on the frame for debris. They're designed to drain excess rainwater, however they can become clogged with insect corpses and other debris as time passes.

If windows have double panes You'll also have to examine the seal between the glass and the frame. This will help maintain a barrier between the glass panes and help make the windows more efficient. The seal could wear down with time and let water leak into the house.

Another sign of leaks is the appearance of water-based stains on the ceiling and walls. They occur when the drywall is saturated with moisture which weakens the fibers and leads to discoloration. There may also be peeling paint caused by the effects of water destroying its adhesive properties and pulling away from the wall.

Faux Muntins & Mullions

In the past muntins (or glazing bars as they are called in the UK) were a way to separate and were used to hold the panes of multi-paned windows. Since the larger expanses of glass that were tempered became available after WWII they went out of fashion. Today, they're only used as a decorative element in a few older homes.

Often it is the case that a small or even a single group of these wooden supports can get damaged by wind or rain, leaving cracks in the window. The good thing is that you are able to repair most of these rotting or brittle components.

First take a rag and clean the affected areas. Use ammonia-based cleaning products that will not leave residue. Remove any rotting or loose components and use an exacta-knife reduce the intersections between horizontal and vertical painted window muntins. After you've cut the intersections, seal the lower part of the window frame using painter's tape. Now, you can apply a thick coat of white paint, paying special attention to the areas which were lightly coated on the first go. Let the paint dry completely before removing the tape and applying a second coat.

If you're experiencing an even more serious issue like a crack that forms an hourglass-like shape in the center of the window, it's likely to be recommended to replace the sash. In these instances, it's important to find the right replacement window that matches the style and size of the existing one.

For a less expensive alternative, you can also install an attached grid window. These windows feature a complete pane of glass, with the muntins being that are glued to the surface which gives them a split look. They're not as energy-efficient as traditional windows, but they are.

Installing a drip-cap will prevent water from leaking into the window frame. You can purchase a range of these drip caps made of aluminum at most home centers for about $20. These are much easier to install than replacement window sashes, and will provide the same functions as a genuine mullion, or muntin.

Broken Sashes & Frames

A broken window sash should be a sign that you need to seek help. A damaged sash, ignored, could lead to water leaks, wood decay and other serious problems to the frame and sill. If you've got a damaged sash, replace it immediately to ensure that the window is properly sealed.

The problem is often caused by damaged or improperly installed cords. Luckily, replacing them is quite simple and can be done in the majority of double-hung windows. To begin, you'll need take off the tabs of metal that secure the sash. Then, push up on the opposite side of the sash (it doesn't matter which side) and then pull toward the opposite side to remove it. You'll want to carefully remove the strip of separation that is what separates the sash from other side so that you can get to the area where the sash cords are located.

It's important that you check the metal tabs on the old sash to the new one. If they're not the same, it will be hard to insert the new one in its place and affect how the sash operates. This can be easily corrected by putting the tabs in their proper positions on your new window.

In addition to the sashes, you'll be required to inspect the frame of your windows for damage or repair windows rot. It's a good idea to do regularly, as wood will shrink and break down over time. You should repair any visible damage as quickly as possible to avoid a bigger issue.

If your window frames are deteriorating they can be treated using a homemade preserver made from half mineral spirits and boiling Linseed. After the treatment has dried, you can restore your frames using high-quality latex paint. A new coat of paint can protect your window from the elements, as well.