• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and are durable and long-lasting. Unlike timber and aluminium, they do not rust or rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your local window repair is damaged, it could cause a large amount of damage to your home, making it very hazardous and possibly fatal. It is essential to ensure that your windows are in good condition.

For single pane windows it is fairly easy to replace them, and the replacement will usually fit inside the frame of the previous one easily. If windows with double panes are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance, you will need to locate some plastic spacers that assist the new pane to fit perfectly into the window frame.

If you are going attempt to remove the window panes by yourself it is crucial to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. You should also lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not onto the floor, where they could be trampled.

It's a good idea to tape the gap once the glass has been removed. This will prevent water and drafts from entering your property until a professional comes out to fix the window. This also serves as an obstruction to prevent criminals from getting into your home. If the gap between the door and the window is large, you might need to consider an alarm system that includes windows. This will provide the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. However, over time they can suffer from a variety of issues like sliding. A sagging uPVC windows could cause issues with light, draughts and even security. It's crucial to act immediately if you discover that your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window which is sagging. To accomplish this, you'll have to open the window to get to the frame. Then, using an screwdriver, unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've repositioned your hinges. If you're happy with the fit, you can tighten the screws to ensure that they remain in position.

If you are unable to reposition the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to loosen. It is important to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. This is typically caused by screws that have become undone over time, but it could also be due to the mechanism of the handle wears out. It's relatively simple to fix a loose uPVC handle. First, you'll need to close the window and perform an initial test fit. The corner joints of the sash should align with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle, and then return the mechanism to its original position.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it's important to take action. Leaks of water from windows can cause structural damage to your home, and impact your ability to regulate the temperature of your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is a relatively easy fix that can be done by any DIY expert. Depending on the severity of the issue is, old caulking may need to be removed. When it is time to uPVC repair, it is important to avoid 'over-caulking'. This will only make your window harder to clean and lower its energy efficiency.

It is important to check that the drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious situations, you may need to think about replacing the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and can quickly spread throughout the home.

It is also important to keep in mind that if the leakage originates from the glass of your double-glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open in a breeze it could be hinges at the fault. These are easily repaired by any DIYer who is skilled and are usually completed in a matter of minutes.

Almost every household in the UK will have either top hung or side hung upvc window repair near me windows that use hinges and Repairs to uPVC Windows like any mechanical part they will wear out over time. Changing a window hinge is an easy process but it can be simpler with someone else to help hold the frame in place.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. You can do this by looking for the arrow on each hinge, this indicates which way the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window a certain way or due to poor installation at the factory. This can often be resolved by sending us a photo via our website and we will be pleased to offer you advice.

Regular lubrication of the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It can also stop corrosion and reduce the possibility of sticking. This is recommended to be done at least once a year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. The hinges can also be misaligned due to wear, which can cause gaps between the frame and sash. If they are beyond repair, it may be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge side of the window, can also become misaligned, again it may be possible to give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

The second most frequent reason for draughts is window seals, these can become worn down or damaged over time, and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping will help to stop draughts. Another option is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and again will lessen draughts.

Lastly, one of the most effective ways to reduce draughts is by using a draught excluder. These are typically fabric tubes which are filled with a kind of filler. They can be placed on the windowsill on top. These will keep your home warm by blocking cold air.

With a bit of regular maintenance and repair, your upvc windows will continue to provide an excellent level of insulation and security for your home. It is crucial to keep in mind that all windows eventually wear out and it may be more cost-effective to replace them instead of fixing them. If you are experiencing issues with your window made of upvc it is recommended to speak with an expert as soon as possible.