• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they do not get rusty or decay.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large amount of damage to your home, UPVC Window Repairs which can make it very dangerous and potentially fatal. It is essential to take the time to make sure that you're doing everything you can to ensure that your windows are in good repair.

For single pane windows it is relatively easy to replace them, and the replacement will generally fit within the old frame very easily. If windows with double panes are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this situation it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you are going to attempt to remove the window panes by yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a drop cloth before you start working on the glass to ensure that any shards fall on the fabric instead of landing on the floor where they could be trampled on and cause further damage.

It's a great idea to seal the gap after the glass is removed. This will stop water and drafts from entering your property until a professional is able to fix the window. It also acts as a barrier, deterring any intruders to gain access into your home. If the gap is particularly large, you might think about the security door with an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. Over time, they can develop a variety of issues such as sliding. A sagging uPVC windows can cause issues with light, draughts, and even security. It's important to take action as soon as you notice your uPVC windows are falling down.

Repositioning the hinges can help fix a window that is sliding. You'll first need to open the windows so you can access the frame. Then, you can remove the hinges on the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to check the fit after you have relocated your hinges. If you're satisfied with the fit of the window, tighten the screws to secure them in the right position.

If you can't reposition the hinges, you may require replacing the seal. Over time rubber seals can lose their elasticity and become dry which causes them to loosen. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and safe from drafts.

UPVC handles can also loosen up. Often, this is caused by screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. Fortunately, it's easy to repair a loose uPVC window handle yourself. First, you'll need to shut the window and do an initial fitting. The joint at the corners of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it is important that you take action. Water leaks from windows not only lead to the degradation of your home's structure but also undermine your efforts to control the temperature within your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is damaged or not present.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Based on the severity of the issue the old caulking may need to be removed before a fresh layer is applied. It is crucial to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area harder to clean and could decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris in them, and also that the sill pan is properly angled to drain away from the window. In more extreme instances, you may need to replace the window.

Mold spots and rotted sills are also signs of water leakage. The fungus thrives in damp conditions and can quickly spread across the home.

It is also important to keep in mind that if the leakage is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. It is also possible to be corrected by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and open in a breeze It could be hinges at the fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like any mechanical component hinges will wear out over time. It is essentially a simple process but it can be easier with someone else to help hold the frame in place.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. This can be done by looking for the arrows on each hinge, this indicates which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window a certain manner or because of improper installation in the factory. This issue can be fixed by sending us a photo through our website and we will be more than happy to give you advice.

Regular lubrication of the hinges is essential. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. Ideally, you should do this once a year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. Firstly the hinges, again due to wear and tear could become misaligned. This can cause gaps to develop where the sash joins the frame. If they are damaged beyond repair, it may be required to realign them. The second is the interlock, which is located on the hinge side of the window, can also become misaligned, again it's feasible to give them a clean but in some instances it could be necessary to get them replaced.

The second most frequent cause of draughts is the window seals. They are prone to wear or damaged over time, and let air escape through these gaps. Replacing these with high-quality weatherstripping will help to prevent draughts. Replace the windows made of Upvc with low-emissivity glasses. This will help to regulate indoor temperatures and lessen the risk of draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler which can be put on top of your window repairs near me sill. They will help block out cold air and keep your home warm and cozy!

With a little maintenance and repairs your windows made of upvc will provide excellent insulation and security for your home. It is essential to remember that all windows will eventually become worn out, and it may be more cost-effective to simply replace them than to repair them. So, if you're experiencing issues with your upvc window repair near me windows, it is recommended to seek assistance from a professional immediately.