• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Amp For planar magnetic closed back headphones Headphones

You want an amp that can power planar headphones with plenty of power. In contrast to dynamic headphones, which require a small amount of power, planars are more energy-intensive and require more voltage.

Look for an amp that comes with a recommended headphone impedance range. It will be noted on the specs sheet or on their website.

AP10H+

The NVA AP10H+ headphone amplifier is designed and made by hand in Great Britain. It is a powerful amplifier that can drive almost any pair of planar headphones (and some dynamic ones) on the market regardless of their impedance or sensitivity. Its high-voltage and current output will provide exceptional dynamic headroom for an impressive sound.

Unlike speakers, planar magnetic headphones are essentially resistive loads, making them relatively easy to drive. They require a higher amount of drive than what can be achieved by the majority of receivers. In order to achieve their 130dB SPL rating they require 4V5 or 10V5 input at 1mW. This is why class A solid state amps are a good choice for them.

The AP10H+ has an output transformer that increases the power to a greater degree, and includes a volume matching resistor that works with the majority of headphones. This allows the AP10H+ to provide more than twice the power to a pair of 32 ohms dynamic headphones.

Nirvana IV

If you love tubes with a warm sound profile, Planar magnetic drivers then the Nirvana IV is the one for you. This powerful amplifier can drive planar magnetic earbuds magnetic headphones effortlessly and has a wide range of output settings to accommodate the majority of headphones with different impedances. It also has a top-quality external power supply unit that delivers constant current to the amplifier. The amplifier is manufactured in Serbia by Milomir Trosic and uses hand-made transformers that provide exceptional musicality.

The Nirvana IV has a single-ended design that can provide 6.5W of pure class A power. It is able to easily drive high-impedance headphones and is able to handle the HiFiMan SUSVARA planar open-back magnetic headphone with ease. The bass response and dynamic range are superb. The Nirvana IV also provides a rich midrange with smooth highs and an impressive amount of detail.

This amp is comparable to the Auris ha-2SE and Headonia amplifiers, but it's a better one in general because it has a more balanced and precise sound. When used with the right headphone, it can reveal hidden layers of music and is extremely enjoyable to listen to. Its balanced mode is impressive, adding a layer texture and warmth that is difficult for other headphone amplifiers to match.

Vacuum tube amplifiers are a favorite among headphone enthusiasts because they have a warm and enveloping sound that people appreciate. However, they are difficult to make use of and require a significant investment. In addition, they produce lots of heat, so it is important to select one with a strong cooling system. The Nirvana IV is a good choice for those who are discerning about their audiophiles because it can be customized using a variety of different tubes.

The Cayin HA-6A is an excellent alternative for those who want to feel the power of a tube amplifier at a low cost. This amp can be used with various types of headphones and is compatible with most popular digital audio formats. The output switch lets you choose between three gain settings that are suitable for headphones that have medium, low and high impedance. It also comes with a remote control as well as an external power supply.

Dragon Inspire IHA-1

The Dragon Inspire IHA-1 is a serious hi-fi pedigree It was designed by (and is produced under the watchful eye of) Dennis Had, founder of Cary Audio. Its design is timeless that is reminiscent of vintage tube equipment, despite the bizarre red paint job.

The IHA-1 is compatible with every headphone as it uses dual triodes 6SN7 to drive headphones. It also has transformer coupling at both inputs as well as outputs. It's also quite small and has a smooth signal path, with no feedback loop.

The IHA-1 is a rich, harmonic sound that we have discovered to be appealing to listeners who love a rich listening experience. It's a great choice for classical, alternative/indie and Acoustic tracks. It's a great amplifier for tracks in pop country, R&B, and rock. However, it's a little warmer side for genres with high energy such as EDM and Metal. Tube rolling can help you make up for the warmth.

The IHA-1 isn't an exception to this rule. In general, headphones that have higher sensitivity are more likely to work with tube amplifiers. We tested the IHA-1 on a variety of headphone models, including the Focal HiFiMan HE-560, HiFiMan HE-560 and Grado RS-1. Speakers Alpha Prime. The IHA-1 offered a full and rounded sound with astonishingly precise lateral imaging and a three-dimensional sense of space that was truly enthralling.

The standard IHA-1 includes a pair 6SN7 Russian tubes. However, it can be upgraded to a NOS RCA GZ34 tube for an extra $100. The GZ34 has a more warm sound than the 5Y3GT reissue, but has a more natural and bassy sound. It also has a sweet treble response that's recessed enough to make the majority of listening experiences glorious and fatigue-free.

The IHA-1's 3D soundstage is particularly evident when paired with the Focal headphones Utopia. The Focal's already precise soundstage could expand planar magnetic Drivers outwards and forwards to reveal an expansive sonic landscape. Listening to the track 'Nublado' from Sera Una Noche [MA Recordings, 16/44.1], for instance, was like being in a hall that happened to have your headphones in it.

Cayin HA-6A

This tube headphone amplifier that is affordable from Cayin is a portable amp with an impressive power. It's capable of driving Planar Magnetic drivers headphones such as the HiFiMan SUSVARA easily, and it also sounds great when used with dynamic headphones such as the Audio-Technica ATH A1000X. It's also highly adaptable, making it a good choice for music lovers with a variety of listening preferences.

The HA-6A is a transformer-coupled design with output transformers that are matched to provide true balanced output. The power supply is also fully controlled, which decreases the ripple effect of voltage amplifying. The circuitry is made by hand using premium wires and point-to-point wielding, resulting in superior clarity and signal integrity. This amp features a high-grade UV meter that can display the signal strength.

The HA-6A has the option of switching between triode and ultralinear modes to offer a distinct audio experience based on your preferences. If you want an authentic, warm sound, use the EL34 tubes with a medium output impedance in triode mode. On the other hand, if you desire a precise and fast sound with plenty of power make use of a pair of KT88 tubes in ultra-linear mode, with a low output impedance.

If you prefer a more neutral sound, the HA-6A comes with an option of tube rectification that enhances the overall sound quality of the amplifier. This feature is perfect for those who appreciate a wide range of music genres ranging from classical and orchestral, to hip-hop, EDM and other electronic music.

The amp is also constructed with a large, custom-made output transformer, which features premium nickel plating. This ensures that the amplifier is rugged and durable. It also features an innovative current adjustment that allows it to match the impedance of various headphones.

The Cayin Ha-6A unlike the Schiit Vali 2+ has a little bit of tube bloom. Its soundstage isn't as detailed or large. It has a faster decay time and more neutral sound than the Vali 2. It has a more forward midrange with more bass and detail than the Vali 2+, but it doesn't have as much extension of the treble.