• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Choosing uPVC Replacement Window Handles

Most customers agree that the upvc replacement window handles are easy to fit and feel like high-quality. It's important to know that the handle you select for your window should be suitable.

The most important aspect is the step height that is the distance from the nose of the handle to the base or frame. Other considerations include lockable styles and mechanisms.

Replacement parts

There is a broad selection of replacement windows near me window handles made of upvc available to buy. There are numerous designs and colors to pick from, so you're bound to find something that is compatible with the windows you have. It's easy to purchase a product on impulse, especially when the handle breaks. It is therefore advisable to look over a few aspects before buying an alternative. The first thing to consider is the type of upvc handle you have now and what the difference between the kinds is. The table below outlines the most commonly used handles to help you identify the one that will fit your windows made of upvc.

The majority of double-glazed windows today come with epag handles. They are usually attached to the frame by two screws that are screwed into the frame from both sides, above and below.

The spindle bar at the back could be of different sizes, and can determine if they are left-handed or right-handed. It is essential to know the measurements of the handle you need to ensure you purchase the appropriate replacement.

The arm is fixed to the frame using two bolts, just like the Espag handle. However, the handle has a lower projection, to ensure that it doesn't scratch your blinds. This is an ideal choice for blinds on your upvc windows and you want to make sure the handle will blend in with them.

Cockspur handles resemble Espag handles, but they have a nose that closes over a wedge that sits on the frame of the window. This kind handle is found on some older wooden and upvc windows.

On casement windows, tilt and turn handles can be operated by either turning the handle or pressing the top of the window. This lets you open the window from inside and clean it from outside without having to climb a ladder or walk across the garden fence. These are ideal for those with mobility issues, and can improve security and access in the home.

Tips and tricks

A lot of people will need to replace their uPVC window handles at some moment. It's important to have some tips and tricks that will make the job easier.

The first thing to do is to determine what kind of handle you have at home. Depending on the type of handle and the locking mechanism, it could be necessary for you to replace the handle and lock. For example, if the shoot bolts (espag) and roller cams are jammed or seizing and sizing, you'll have to change them, as well as the handle itself.

Thankfully, the majority of uPVC handles are very similar and follow industry standard size, which makes replacing them a easy process. First, take off the screws on the handles. They are typically pozidrive screws. After these screws are removed, you can take the handle apart.

It's a good idea to note how much the spindle protrudes from the base of your handle when you remove it. This will allow you to determine the length of the spindle for a replacement handle. To do this, measure the amount of the square peg sticking out from the top of the handle, and use this as a guide.

This is especially true for inline uPVC handles for windows, since they are always straight and will only open left or right. They won't work in the middle. It is a good idea if you're not certain of the kind of handle you have in your home to borrow a handle and see how it functions.

Another excellent method to figure out what the handed of the uPVC window handle is is to look at how the handle turns when operating. Handles can be turned clockwise or counter-clockwise. If you aren't sure then ask someone to open the window with the handle and see how it works.

Take a measurement of the spindle

The selection of the right replacement handle for your windows could be a challenge as not all handles are the same size. The spindle is what controls the locking mechanism inside the window. It is essential to ensure that when installing the new handle it is measured to the length of the spindle precisely to ensure that it fits. There are several different types of uPVC window handles, and they work in different ways, so it is essential to know the type of handle you have as well as the type of locking system you have.

Espag handles come with a spindle that extends from the rear of the handle and then into the lock gearbox inside the window frame. When you turn the handle, this will turn the lock inside the gearbox and opens the window. They are installed on uPVC windows with casement. They can be locked with keys for extra security.

Cockspur handles are equipped with an "nose" which closes over an elongated striker block that is placed on the frame and they are typically found on older double-glazed uPVC windows. They are also simple and can be locked with keys. It is more difficult to replace these handles since they are less common than the handles with espagnolette.

If you have a tilt-and-turn uPVC, you will need a replacement handle with an alternative locking system. The handle will tilt the window and also allow it to be turned around to fully open it. It is essential to select a handle with a spindle of at least 55mm to be able to reach the window frame.

The same procedure can be used to remove and replace the uPVC handle. However, you will need to be cautious when unscrewing it. You may need to open the window a bit larger than normal to ensure that you reach both screws that are fixing it to the frame. Once you have put in your new uPVC handles and confirmed that they are in the correct position then tighten the screws and then test to ensure the lock works properly.

Install the new handle

When you have the proper replacement handle it can be screwed in place. It will require a screwdriver and an electric one might be more convenient. It is important to not overtighten the screws when screwing them into. This could cause the handle or knob to swell.

The second step in installing the new handle is to insert the spindle. This is the component that is inserted into the handle and operates the locking mechanism within the window. It is vital that it is installed correctly since it will ensure that the window can be closed and opened with confidence.

There are many different types of uPVC handles. These include:

Espagnolette Handles are handles inline which can be used to open tilt and turn windows.

Cranked Espagnolette Handles - these are similar to the inline handle however they feature a curved design that can be useful for windows that are difficult to reach.

Tilt and Turn Handles They are used on tilt and turn windows for operating the opening and closing mechanisms.

They are the most popular and the majority of uPVC windows have them in their place. They are commonly called 'Bay Windows' in the UK.

It can be very frustrating when your uPVC handle breaks. There is no need to replace the entire uPVC window because of a damaged window handle. There are a few easy steps you can follow to fix or replace a damaged uPVC handle.

By identifying what kind of window you have, measuring the spindle length and uPVC Replacement Window Handles purchasing a replacement handle you can quickly fix your broken window handle. When working with windows and tools it is crucial to put safety first. But, this is a relatively simple job. It can mean the difference between having a safe and secure home or a window that is easily opened. Bridgewater Glass is the place to go if you have questions or want to speak with an expert regarding replacing your window handle. We have a team that is skilled and knowledgeable to help you with any problem.