• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they do not corrosion or rot.

Regularly cleaning and uPVC window repairs lubricating UPVC windows and doors is crucial. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and may even be fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good shape.

Single-pane windows are relatively easy to replace and generally fit into frames that were previously in use very easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this situation you'll need find some plastic spacers that will assist the new pane to fit perfectly into the frame of the window.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass by yourself. It is also recommended to lay down a drop cloth before you start working on the glass, so that any shards fall onto the fabric instead of onto the floor where they could be trampled upon and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to block water and drafts from getting into the home until a professional is able to come out and fix the window. It also acts as an obstruction to prevent intruders from making their way into your home. If the distance between the window and the door is large, you might prefer security screens that has an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. However, with time, they may be afflicted by a variety of problems including sliding. A sagging uPVC window can cause issues with light, UPVC window repairs draughts and even security. It's crucial to act when you notice your uPVC windows are sagging.

To fix a window that is sagging you can try repositioning the hinges. To accomplish this, you'll have to open the window so that you can get to the frame. With a screwdriver, you can unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have repositioned your hinges. If you're happy with the fit, you can tighten the screws to ensure that they remain in position.

If you aren't able to move the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes their tightness to decrease. If this happens, it's crucial to replace the seal as soon as you can to ensure that your uPVC windows are waterproof and secure from draughts.

UPVC handles can also loosen up. The majority of the time, this is caused by screws that have come loose over time. However, it can also happen because the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC hand. The first step is to close the window and then perform an experiment to ensure that it fits. The corner joints of the sash need to align with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is damaged or is missing.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on the severity of the problem the caulking that was used up may require removal before a fresh layer is applied. It is important to remember that when it is about uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area harder to clean and can reduce the efficiency of your energy.

Verify that the drainage holes are free of debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more severe situations, you may have to replace the window.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and can quickly spread across the home.

It is also important to keep in mind that if the leakage originates from the glass of your double-glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. This can be easily fixed by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open with a breeze It could be hinges at fault. They can be repaired by any DIYer who is skilled and can be completed in just a few minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that are hinged and like any mechanical part they will wear out over time. Changing a window repair hinge is an easy process, but it's easier to do when you have a person to help hold the frame up.

Make sure that the uPVC hinges are open and closed in the proper direction. This can be done by looking for the arrow on each hinge, this shows which way the window should open.

The issue can be caused either due to opening the window in the wrong way or due to a poor installation in the factory. This can often be resolved by sending us a picture on our website. We will be happy to give you suggestions.

It is also essential to grease the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. It is recommended to do this once a year. WD40 or other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by different causes. Firstly the hinges, again because of wear and tear, could become misaligned. This can cause a gap to form where the sash joins the frame. This can be easily repaired by giving them good clean, but when they're beyond repair, it may be necessary to get them realigned or replaced. The interlock may also become disaligned. This happens on the hinge's side, and might require to be cleaned. In some cases it is possible to replace them.

The seals may wear out or become damaged over time, allowing air to escape. Installing high-quality weatherstripping will help to keep draughts at bay. Another option is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and will reduce draughts.

Another method of reducing the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. These will help to block out cold air and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security in your home with a little regular maintenance and repairs. It is crucial to recognize that all windows have a lifespan and eventually, they will reach the point when it's more efficient to replace them than repair them. If you have any problems with your upvc window, it's best to consult a professional as soon as possible.